We Broke Our 4WD Power Wheels Go Kart on the FIRST JUMP! Road Test, Fuel Tank, Floor Mounted!

  Դիտումներ 147,295

CarsandCameras

Ամիս առաջ

We change the final drive gear on our Tillotson 228cc powered four wheel drive power wheels go kart, and take it for a spin! The gearing is still too tall, but it’s already performing much better. Ike takes the power wheels go kart off a jump, and soon after the front suspension falls apart because we hadn’t used proper locking nuts during assembly. We bolt the front suspension back together with the proper hardware, build floor pans, build a fuel tank and seat, and take it for another spin. We still need a gas and brake pedal, and a slightly shorter gear, but so far this little ford bronco go kart rips and the suspension feels great!
Thanks for Watching!
Facebook: goo.gl/VR6mh2
Instagram: goo.gl/PqOIo3
-----------------Go Power Sports Parts Used in Today’s Video----------------
Tell them CarsandCameras sent you at checkout:
Mechanical disc brake kit: bit.ly/3gx4URO
4” brake drum, 1” bore: bit.ly/38FrZyl
4” brake band: bit.ly/38FEgD5
Heavy duty cable: bit.ly/2ZzU5Fc
Fuel pump: bit.ly/3rC9ByU
Gussets: bit.ly/38VUN63
Go Power Sports: goo.gl/c2Tz6o
Get $100 off any Langmuir Systems Crossfire CNC plasma table using this link, or use code CARSANDCAMERAS at checkout: store.langmuirsystems.com/discount/CARSANDCAMERAS
NEW MERCH: www.cars-cameras.com/
Equipment we use: www.amazon.com/shop/carsandcameras
The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result. CARS AND CAMERAS, the persons shown in this video and ANY CONTRIBUTOR, ARE NOT LIABLE FOR ANY such injury or damage. ALL CARSANDCAMERAS CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.

Cars and Cameras makes no representation about the sufficiency of any safety precautions and equipment used in this video.

Մեկնաբանություններ
Nathan Stribrny
Nathan Stribrny 4 օր առաջ
You guys could really use a tig welder. Everlast is cheapish and works good.
alangri2000
alangri2000 5 օր առաջ
I'm watching this in Jan 21 so it's probably been addressed but I don't see a fill neck. Also was thinking a small jerry can gas tank would be cool on the back.
William Wille
William Wille 5 օր առաջ
Did you make sure you cleaned out metal shavings from drilling it before you put in the bung for fuel line
john martone
john martone 8 օր առաջ
typical ford broken down being towed lmao
saha6818
saha6818 8 օր առաջ
Ike is the pulse pump (when he bounces on the seat).
johnnybikesalot
johnnybikesalot 13 օր առաջ
I would love to weld a squishy suspension like this onto my basically rigid manco dingo, that would be so cool.
Carl's Computer Hardware
Carl's Computer Hardware 16 օր առաջ
hey i just found this it might help with your turning issues. here is the video. am-posts.info/list/m7vOlWTJlqLdoGk/video&ab_channel=What%27sgoingoninDoug%27sShed%3F
Jimmy C and Friends
Jimmy C and Friends 18 օր առաջ
Now you guys need to build a Recovery Vehicle
TanTheMan
TanTheMan 18 օր առաջ
What gear ratio are y'all are running? I've got a stage 1 Predator 420 on a little 2 seater running about 4.11 I believe and the drive pulley never pulls in, the clutch does perfect but the drive pulley stays all the way out the whole time. (Series 40 GPS)
Ervin Goertzen
Ervin Goertzen 22 օր առաջ
You guys could use a hydraulic motorcycle lift
Donald Fuller
Donald Fuller 22 օր առաջ
You guys need to challenge yourselves and do a build that's up to the builds coming out of the grind hards stable.
RotarE30 Guy
RotarE30 Guy 22 օր առաջ
Yo what's the update with the pond? Did it ever clear up?
Shawn Waters
Shawn Waters 23 օր առաջ
Is there another phone number for go powersports ... I wanna order a lot of stuff
Zark Muckerberg
Zark Muckerberg 21 օր առաջ
Yes, 866-846-5278. I don't think they do phone orders though. They have a website(I doubt there is a limit to the cart) as well: www.gopowersports.com
Adam
Adam 23 օր առաջ
would love if you were able to ship to 🇨🇦 🍁 🇨🇦 I would buy some merchandise.
Official. TrillWill
Official. TrillWill 23 օր առաջ
Hello community I just need SUM HELP, I recently built a go kart predator 212 engine and it took me around a month to two months in between waiting for the parts and putting it together the upgrades that I made are governor removal,oil sensor removal, upgraded air filter, upgrade jet I check the oil fuel and the gas fuel and everything is perfect please help!!? I crank it up and it shakes like it wants to do something.....
Donald Tavares
Donald Tavares 23 օր առաջ
Nice Seatank right there!
Alexander Lundgren
Alexander Lundgren 23 օր առաջ
Get in touch with this guy and build a crazy electric gocart and run the CnC-GP!!! Austinwawa: am-posts.info/cd/kURR2CLd5iDc0B11rSkFeg.html
StevenPoo Haynes
StevenPoo Haynes 23 օր առաջ
How come you guys decide to slow everything down
Bill Lee
Bill Lee 23 օր առաջ
My gosh! There is a lot of technology in this thing for a simple little go cart. It’s got NASA level gantry crane bracing, Indy 500 simulated sprockets, heavy construction chains and gearing. All without any cad cam drawings or even so much is a scribble on the back of a tavern napkin. Incredible job
nottoday son
nottoday son 23 օր առաջ
It'll be alright though
Kyle Nichols
Kyle Nichols 24 օր առաջ
I hope y'all see this! I need help/advice! I put together a cart for my daughter for Xmas, it is a 1993 manco 2 seater and it had a 5hp brigs, well that motor needed more than I wanted to do so, I had a 6.5 hp honda that I put on, got everything workingish... The problem I'm having is the belt is just a hair to tight and the cart basically doesn't have neutral. My question is how do I measure the belt, and who do you recommend I buy one from?!?!? I hope to hear from yall!
Logan Rowe
Logan Rowe 24 օր առաջ
bring back the 440 Murry
DamLit Productions
DamLit Productions 24 օր առաջ
"Isuck" It wont be fine,, I get "The learn as we go along" WORDS, but both you have lots of experience by now, and a mechanic, How are you still showing us "BODGE JOB DEATH TRAPS....We feel your pain come through on the videos....F Life Insurance, Write up a "WILL"...be fine...
Earl Dupont
Earl Dupont 24 օր առաջ
Stretch the chassis a little....more room for Issac
Kenny Campbell Jr
Kenny Campbell Jr 24 օր առաջ
When are you guys resurrecting the Cross Cart?
Dylan Bradley
Dylan Bradley 24 օր առաջ
I’m loving the beard guys hahahaha
Dax Carr
Dax Carr 25 օր առաջ
It would be absolutely hilarious of Taylor got a chance to drive that
Gv Chevy
Gv Chevy 25 օր առաջ
Ive been watching you guys for 3 years now and i still cant figure out why you guys dont make your carrs bigger for issac when you guys build them. Make the carts bigger for you guys. I wouldnt want to ride something this small.
LindaStevensBZ
LindaStevensBZ 25 օր առաջ
You could probably sell those little trucks
Mike Puckett
Mike Puckett 25 օր առաջ
You guys might consider motorcycle handlebars and controls on this one
Michael Dover
Michael Dover 25 օր առաջ
Looks uncomfortable sitting on it maybe some pegs or something just looks cramped cool look though
akkudakkupl
akkudakkupl 25 օր առաջ
Hey guys maybe you could measure your built engines real power... It's super easy to build a simple chassis dyno with arduino and some hardware bits. If you want help with software side of things contact me ;-) Basicaly what you need to do is: Get a large diameter pipe - measure the diameter, weigh the pipe - this will be your dyno roller. Weld end caps on the pipe, add axis, self aligning bearings, etc. hardware. You need to calculate your roller moment of inertia (moment of inertia for a hoop around its symetry axis = roller mass times radius squared). Now you need a sensor that will pulse once per roller revolution - this can be an induction sensor that will sense a tooth welded to your roller axis. Your instrumentation device will measure time intervals between roller revolutions and send that data to your computer (arduino through serial link - real simple). From this data you will calculate your angular velocities and angular acceleration - Excel or OpenOffice will make this real easy and give you graphs ;-) Your torque at given angular velocity is your angular acceleration times roller moment of inertia. Your power at given angular velocity is angular velocity times torque.
fatbuddycat
fatbuddycat 26 օր առաջ
HELP!! What causes derailment on the MB200-2 more, the 60t or the suspension lift? I'm trying to make a life altering decision here so any input would be GREATLY appreciated! I'm running a stage 2 plus a 14cc head with a CS grind cam and 22# springs for 7,000rpm. I'm already going to get a juggernaut but I need some guidance for the sprocket, you think a 54t with a juggernaut is a good idea since I'm jacking about 15hp?
Lucas Nolte
Lucas Nolte 26 օր առաջ
It’s Primes the fuel lines when you sit down😂
J0rdanRaY 508
J0rdanRaY 508 26 օր առաջ
Throw it out!! This is hard to watch
J0rdanRaY 508
J0rdanRaY 508 26 օր առաջ
Been a long time sub. No offense but this thing sucks, too small, and need a giant kitten on the hood! 😹😹😻
Rob's small engine antics
Rob's small engine antics 26 օր առաջ
I have an idea that I think would be a challenge, this is the only way I know of to get my idea to you. A mini bike with a super stretched frame, 420cc predator... and build it to look like the drag bikes that the rider almost lays down on his stomach. Or if you have a big 2 stroke motor with transmission that would have more potential.
Hockey Sockeys
Hockey Sockeys 26 օր առաջ
Dose anyone know where I can get a yerfdog
danny stubblefield
danny stubblefield 26 օր առաջ
Blue locktite is your friend.
Nathan Wadding
Nathan Wadding 26 օր առաջ
You guys should instead of pedals use a brake handle off a pedal bike for the gas
Chanler Johnson
Chanler Johnson 26 օր առաջ
You got any dirt bikes you would get rid of
tyler238
tyler238 26 օր առաջ
Looks cramped
Quetzalcoatl Toltec Sun God
Quetzalcoatl Toltec Sun God 26 օր առաջ
Any news on a new drag rail build I really want to see one with a twin 400cc 2 stroke engine.
jose Garcia
jose Garcia 26 օր առաջ
Hey guys do you still offer a coupon code for go power sports ??
SportbikerNZ
SportbikerNZ 26 օր առաջ
This was a great episode. It's shaping up awesome.
Tim Fetters
Tim Fetters 26 օր առաջ
Here’s my advice to help you have a happy and prosperous new year: if you find leaks in the gas tank (which is awesome, btw) after you’ve put gas in it, don’t touch up the welds! LOL Pour a liner in it.
Harsh Fire
Harsh Fire 26 օր առաջ
I would say to stiff just the rear a little bit
Mark Schaffer
Mark Schaffer 26 օր առաջ
yall need a heater ,i can see yall breath lol
Larry Fogle
Larry Fogle 26 օր առաջ
Extend the wheelbase 12” to 18” in the middle. Might as well make it rider friendly.
willowbrook hermit
willowbrook hermit 27 օր առաջ
Look at the old Willis jeets you're setting on the gas tank
sleeperking01
sleeperking01 27 օր առաջ
You guys should have made it atleast an inch 1/2 longer so its more comfortabe feet wise
willowbrook hermit
willowbrook hermit 27 օր առաջ
What did you do with the electric motors Hook them up to a bicycle.
Wade Wright
Wade Wright 27 օր առաջ
Y'all really need a sump for the fuel tank. It's so wide and shallow.
James McGee
James McGee 27 օր առաջ
This kart is awesome guys. There are plenty of free gear ratio calculator apps out there. Forget all of the guess work and take advantage of those Phone apps.
akkudakkupl
akkudakkupl 27 օր առաջ
Cool thing
Peter Emery
Peter Emery 27 օր առաջ
Will the fuel filler be side or rear-mounted?
Built Minis
Built Minis 27 օր առաջ
Are you surprised it broke lol
Nathan Louis
Nathan Louis 27 օր առաջ
I think you need more commercials
WrenchandRip
WrenchandRip 27 օր առաջ
even though its way too soft it is cool to watch all your suspension work in action
TandM bros
TandM bros 27 օր առաջ
I think it needs handle bars instead of a steering wheel
Bo Boura
Bo Boura 27 օր առաջ
Nice build. But whatever happened to that diesel engine and why hasn't it been put in the monster truck ? Its already a torque monster why not go ballz to the walls with the torque . Burnouts that pulls the earth out of rotation
Micah LeVoy
Micah LeVoy 27 օր առաջ
What happened to the video you posted today? Did it get taken down?
Jay Titus
Jay Titus 27 օր առաջ
Where is your holiday burnout? See VGG to see what I mean. Gitter done!
John Brown
John Brown 27 օր առաջ
Beef up the rear suspension a bit and you got it....
Lyle Williams
Lyle Williams 27 օր առաջ
u guys should make a go kart that looks and performs just like the go kart on gta 5
Ihave Noclue
Ihave Noclue 27 օր առաջ
Ike in his size 12. I'm crying in size 14 😭😭🤣🤣🤣🤣
g meeks
g meeks 27 օր առաջ
Ok guys I have a idea for you . Try to use 21 speed bicycle gearing on a project,it would be like a big rig with a high low axle :)
Jon g
Jon g 27 օր առաջ
Need heavier shocks like atv shocks not go kart shocks at least for the rear
Mark Rogers
Mark Rogers 27 օր առաջ
That looks great guys!
Cameron Wilson
Cameron Wilson 27 օր առաջ
Hook the gas pedal up to the steering wheel it would work good for crawling
Matthew Soltis
Matthew Soltis 27 օր առաջ
Hey can i get youre email just watched the live
Zark Muckerberg
Zark Muckerberg 21 օր առաջ
Jinzerillo64@gmail.com At least that's the email from their about page.
XtReMe DiY
XtReMe DiY 27 օր առաջ
​I am building a tecumseh ah600 any carb suggestions? 98cc 2 stroke.
Charles Levac
Charles Levac 27 օր առաջ
Hi Guys for the gearing. Why did you guys decide to go to a bigger sprocket in stead of going to a smaller front sprocket. You needed a big change and going down 1 or 2 teeth would be a bigger change in gearing then going up a bunch of teeth on the rear. Just wondering..
Logan Aldridge
Logan Aldridge 28 օր առաջ
Where is the Murrayt kilowatts with the arctic cat motor it has been sitting for three years
Edward Wynn
Edward Wynn 28 օր առաջ
Chances of getting a 2020 in review video?
isac scot
isac scot 28 օր առաջ
big clap on trying tho
isac scot
isac scot 28 օր առաջ
dont do any more on dat
Nick W
Nick W 28 օր առաջ
You guys should really do some research on shock angles and pivot points, you could literally screen shot AM-posts videos of off road cars, sand cars and the like and measure the angles to make things work better looking at the angle of those rear shocks vs the articulation of the rear end seems like the shocks really aren’t dampening anything, just side loading the shock shafts.. , just a suggestion. I like the videos regardless just thinking you guys are holding your skills back a little, I think you guys have the ability to do wayyy more if you just look up the angles
Caleb Todd
Caleb Todd 28 օր առաջ
Should do a give away on one of those carts. By selling merch
Legoman585
Legoman585 28 օր առաջ
The power wheels looked awesome coming around the corner before the jump.
How to Paint with Brettski
How to Paint with Brettski 28 օր առաջ
Back of seat you have bar going straight across, maybe Ikes butt will have more room if you curved that rear bar?..
Eli Renigar
Eli Renigar 28 օր առաջ
I’d extended the wheelbase dead in the center just a tad for posterity
Michael Mezey
Michael Mezey 28 օր առաջ
Great build just think you guys should have made the frame longer it would handle alot better
Trevor Miller
Trevor Miller 28 օր առաջ
Happy New year! 🥳
michael Thomas
michael Thomas 28 օր առաջ
I hope it works out for you guys but I don't think it's a very good idea using a bigger disc and that other brake caliper I think that they're supposed to be a match set because of a bigger circles going to make a difference in your caliper grab of the disc which is why even cars when you upgrade the discs you have to upgrade the calipers because they're bigger calipers for bigger rotors
Chicken Fingers
Chicken Fingers 28 օր առաջ
For the fuel tank you can just weld it up, seal the out side with jbweld and coat the inside with tank liner
Luke Benton
Luke Benton 28 օր առաջ
Y’all should make a qna and one of the questions should be what y’all do for a living
Joel Ducsai
Joel Ducsai 28 օր առաջ
Can you guys start using good suspension even use stuff from the front end of past 20 years of 4 wheelers rather than........ the lower quality shocks you use??
Tom Kimbrel
Tom Kimbrel 28 օր առաջ
Am I missing something; maybe a fuel filler neck and a gas cap? Somehow a way to fill the tank and a vent?
samiam20024
samiam20024 28 օր առաջ
Turbocharged briggs and stratton engine
skullboi2012Plays
skullboi2012Plays 28 օր առաջ
This thing is sweet but you might want to stretch it just a little bit more
three wheela
three wheela 28 օր առաջ
Sitting on the gas tank? Yeah no thanks.
Review Account
Review Account 28 օր առաջ
Needs some back support, at least a simple hoop with a pad on it.
apaudorff
apaudorff 28 օր առաջ
Stretch it some, seems way to short of a wheelbase to actually be able to floor it
sportster davidson
sportster davidson 28 օր առաջ
You could just drill a hole for cotter pins , no need for lock nut , besides that ive had lock nuts back off in the past .
josh blainer
josh blainer 28 օր առաջ
Do you guys still have the 420cc single seater off-road kart? That would be a cool revival
Jade Johnson
Jade Johnson 28 օր առաջ
Hey can I buy that from you ??
32awosome
32awosome 28 օր առաջ
Need to build ike a power wheels! Something he can fit then y'all will have your own to rip around
Caleb Torres
Caleb Torres 28 օր առաջ
How do I find a cheap frame qaud cities Illinois
Kraese Repairs
Kraese Repairs 28 օր առաջ
should get fork lift bars for the front of your tractor
4x4 Bronco Power Wheels Go Kart First Rip! | Mud Run, Jumps, & More!
24:36
10,000 RPM 212cc Build | 20+ HP, Stage 4+
20:19
CarsandCameras
Դիտումներ 445հզր
i just took a DNA test
0:20
Gus Johnson
Դիտումներ 2մլն
EVERYTHING WENT WRONG
22:12
emma chamberlain
Դիտումներ 2.6մլն
Elche vs Barcelona | LALIGA HIGHLIGHTS | 1/24/2021 | beIN SPORTS USA
11:19
I Completely Broke Minecraft's 1.17 Snapshot
18:47
Ph1LzA
Դիտումներ 1.7մլն
We Bought TWO Yamaha 2 Stroke 3 Wheelers | Will they Run & Ride??
17:52
I CRASHED OUR 1000cc Trophy Truck on the FIRST HOT LAP!
23:39
CarsandCameras
Դիտումներ 201հզր
Building an Off-Grid Homestead  ..... start to finish
35:06
Bushradical
Դիտումներ 1.1մլն
Will It Run? Four Wheeler picked from the trash.
1:03:44
Mustie1
Դիտումներ 792հզր
65MPH Racing Mower FLIPS! | Racing Mower vs. Drag Mini Bike
15:51
CarsandCameras
Դիտումներ 1.1մլն
125cc Power Wheels Jeep Part 3 - Test Drive
06:47
JackOfNoTrades
Դիտումներ 654
i just took a DNA test
0:20
Gus Johnson
Դիտումներ 2մլն
EVERYTHING WENT WRONG
22:12
emma chamberlain
Դիտումներ 2.6մլն
Elche vs Barcelona | LALIGA HIGHLIGHTS | 1/24/2021 | beIN SPORTS USA
11:19
I Completely Broke Minecraft's 1.17 Snapshot
18:47
Ph1LzA
Դիտումներ 1.7մլն
TELLING MY BOYFRIEND HE HAS A "WAP" TO SEE HOW HE REACTS..
15:52
Lex and Jack
Դիտումներ 105հզր
Police SUV seen plowing through crowd in Tacoma, Washington
1:56
NO E PODIDO CASTIGAR A JAIMICO | SE ESTA PORTANDO MAL | LOS TOYS
17:56
FATHER and SON Hauling Duo | Farm-Style Trucking
24:42
Welker Farms
Դիտումներ 138հզր