How Fast is Our Little Tikes Go Kart??

  Դիտումներ 179,748

CarsandCameras

11 ամիս առաջ

Today we do a Cozy Coupe 550cc top speed run! We also add a chrome chain steering wheel for looks on this little tikes go kart, and we change the gear ratio of this go kart for a higher top speed! This go kart's top speed before gear changes was about 45 miles per hour, and we're shooting for 60!
Thanks for Watching!

Facebook: goo.gl/VR6mh2
Instagram: goo.gl/PqOIo3

Go Power Sports: goo.gl/c2Tz6o
NEW MERCH: www.cars-cameras.com/
Equipment we use: www.amazon.com/shop/carsandcameras

The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result. CARS AND CAMERAS, the persons shown in this video and ANY CONTRIBUTOR, ARE NOT LIABLE FOR ANY such injury or damage. ALL CARSANDCAMERAS CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.

Cars and Cameras makes no representation about the sufficiency of any safety precautions and equipment used in this video.

Մեկնաբանություններ
Daan Prins
Daan Prins 14 օր առաջ
Looks sketchy. I like it
David Ingling
David Ingling 25 օր առաջ
Have you ever run that on asphalt?
Brad Huey
Brad Huey 2 ամիս առաջ
Take it down a back paved road then test it. That's what I want to see.
Mike Barrett
Mike Barrett 3 ամիս առաջ
Ya need to do this on a smooth surface!
Kaden Shablow
Kaden Shablow 4 ամիս առաջ
That should just be a drift cart
Nicole Schoeman
Nicole Schoeman 4 ամիս առաջ
build two stroke turbo
Raptor Cabezuela
Raptor Cabezuela 5 ամիս առաջ
Fast lil sucker huh
Damon Rice
Damon Rice 5 ամիս առաջ
Thats badass cozy cupe!! Love it.
сергей елисеев
сергей елисеев 5 ամիս առաջ
Может вам Оку выслать завода КАМАЗ?
Amy Vierra
Amy Vierra 5 ամիս առաջ
I have the same steering wheel on 1 of my go karts
j. s.
j. s. 5 ամիս առաջ
Shoud of called it the Tike bucket... Very nice build
nicolas recio
nicolas recio 5 ամիս առաջ
Chop the top make it convertible😎👌🏽
K.J.Ray
K.J.Ray 6 ամիս առաջ
I am sooooo glad I chose this video right after I finished a bowl....It was not disappointing that's for sure. Fallin over laughing watching you 2 try to fit in there. Love the build, sounds mean. Can you imagine if it was geared to barely spin the tires....100 wouldn't be too hard to achieve I'd think.
Paul Schultz
Paul Schultz 7 ամիս առաջ
I think the green and yellow little tikes hammer toy would make an awesome shifter!
Just Rip IT Racing
Just Rip IT Racing 7 ամիս առաջ
That thing needs to be on the street with those tires on it that’s why it’s so sketchy on the dirt those are pure street tires
Quetzalcoatl Toltec Sun God
Quetzalcoatl Toltec Sun God 7 ամիս առաջ
60 is slow need at least 85
Daniel Gunter
Daniel Gunter 8 ամիս առաջ
You guys are completely insane. And I love it!
Mick
Mick 8 ամիս առաջ
How big is that axle? I've got a 80hp 600cc with 1" axle. Haven't driven it yet, thinking I might twist it right off lol
RumbleBones
RumbleBones 8 ամիս առաջ
This is Ed Roth, Tom Daniels rodding.
Al Brustkern
Al Brustkern 8 ամիս առաջ
I really enjoy your personalities, methods and projects. On the cozy coupe steering linkage, as an alternative I have used sprockets and chains. You can play with ratios, or even make a corner. Just another approach to consider.
StupidEarthlings
StupidEarthlings 9 ամիս առաջ
My money is on John having "the accident that changes things". Well, before Ike anyway. Just watchin him "handle" some vehicles. ;)
StupidEarthlings
StupidEarthlings 9 ամիս առաջ
Is there a chain wheel on the hearse? If not, should be.
Paul Visage
Paul Visage 10 ամիս առաջ
Cool steering wheel its just too big. Take on a proper roadssurface for a proper test not a dirt road then you should hit that 60 mph easily. . Dirt road fun but unsafe.
Big Worm Laird
Big Worm Laird 10 ամիս առաջ
You need a roll and tuck rear fenders just on back though
Gypsie Slayer
Gypsie Slayer 10 ամիս առաջ
Paddle tires in the sand, perfect setup for sand drags.
Nanang Hutomo
Nanang Hutomo 10 ամիս առաջ
I think it was like a rat rod.
robert gilmer sr.
robert gilmer sr. 10 ամիս առաջ
Hey guys! I have been a fan for a while now and why I haven't thought of this before now is beyond me! Anyway, long story short (yes, I'm a writer of fiction)(nothing published yet, still looking for the right agent...) about 20 years ago, I bought a go-kart from a friend, for my two early teen boys. The kart had a 3.5 Brigs on it that just did not have the power to pull the hills of our mile-long gravel/dirt driveway in northern California. Well, we had an old Honda 200 cc three-wheeler sitting under an old blue tarp alongside our barn that needed tires, wiring, seat, fenders, etc. One rainy day, we were walking past that old Honda and on a lark, I pointed to it and said, "We should put that Honda motor on the go-kart." My oldest said, "Can you do that, Dad?" Me and my big mouth! "Sure I can!" A month later, the brake lever cut down and turned into the hand shifter welded to the left of the seat, (home-made linkage, of course). I had to take the axle sprocket off the kart, grind the teeth off flat, then center the axle sprocket from the three-wheeler onto the go-kart sprocket and weld it home, then remount the kart sprocket back on the kart so that we could run the larger Honda chain on the kart. Then we had to remove ALOT of aluminum from around the lower part of the drive sprocket area on the honda motor to except the new drive angle (~55 degrees counter clock ways from stock.) We beefed up the frame under and around the engine area using parts of the handlebars from the honda and used what was left of the bars to extend the frame on the backrest, because of the close proximity of the modified exhaust pipe behind the riders head, then added a homemade padded headrest covered in Naugahyde. Two new lawnmower throttle cables with a spring set-up in between them to aid deceleration. We used the stock motor mounts, welding them in place with angle iron. The motor sat at so steep an angle directly behind the seat, that I had to make an intake adaptor plate out of 1 1/4" sub-floor plywood, ground down and lined with JBWeld sanded smooth so the carb could sit level! After that, it ran great! However, to check the oil, I had to pick the front of the kart up to ~ 70 degrees w/ the bucket of the tractor, until the "Honda" logo on the points cover read flat like it was still in the three-wheeler! (I did promise a short story!") We would love to see you guys take on this challenge and build one your selves! We double-dog dare ya! (We called it the "Monster" for good reason and on the lawnmower gas tank mounted above the motor read "Get On-Hold On-Be Gone". We clocked it on our longest straight away at 78 miles an hour w/ 5th gear yet to go, but we ran out of road!) Keep up the hard work! From Builder Bob (retired) of Northern Cali!
Chris Brown
Chris Brown 10 ամիս առաջ
Nice
Melvin Bell
Melvin Bell 10 ամիս առաջ
I want to buy it!!!
BUDD
BUDD 10 ամիս առաջ
Throw on a drag strip after you build a steel roll cage (but taller) to match the original one!
Guy Schneider
Guy Schneider 10 ամիս առաջ
I was thinking that a snowmobile belt drive would be perfect for power on the low-end and speed up to 90 mph
JMZVIDEOZ1959
JMZVIDEOZ1959 10 ամիս առաջ
this little rod is bad ass dude
Justin Hudson
Justin Hudson 10 ամիս առաջ
That is bad asssssss
neth ; nethanel mas ; masters
neth ; nethanel mas ; masters 10 ամիս առաջ
I threw out 2 chain steering wheels one 8 in. And a 12 in. at our local scrap metal recyclers.
Mocking69
Mocking69 10 ամիս առաջ
最高のマシンです=3 秀樹も感激~=3
Dflo Dflow
Dflo Dflow 10 ամիս առաջ
It almost looks like a halo on the lil bro
RJDCR
RJDCR 10 ամիս առաջ
kool , luv th chain wheel
chefboyrdjr
chefboyrdjr 10 ամիս առաջ
Nads of steel
raw weiner
raw weiner 10 ամիս առաջ
cut a hole in the roof just for enough for the head
gonecountry01
gonecountry01 10 ամիս առաջ
Why dont yall cut the center of the roof out like a convertible so it still has the look but you can fit in it and you can keep the back piece so you can have a back window or keep it as a whole and when you take it to shows you can put the top on @carsandcameras
Getier2k
Getier2k 11 ամիս առաջ
cute
Marc Schmitt
Marc Schmitt 11 ամիս առաջ
For gear ratios, driver and driven side tooth numbers are used for calculations. If for example you had a 15tooth on the transmission going on a 30 tooth on the transition axle, and you swap the 30 out with a 15 you get double the speed. (generally speed is calculated with driver side teeth divided by driven side teeth (repeat for the transition axle) times the rpm at the drive shaft and tire circumference) So with lets say 10inch diameter rear wheels, a 15 tooth on your transmission going on a 16 tooth on the transition axle(the one which you attached a new sprocket to in this video), from which a 15 tooth goes on a 20 tooth on your rear axle and an rpm of around 2700 (assuming the engine revs. about 8100 and the internal gearing of the cranks is about 3 and the gearing of the highest gear is almost 1) you should have around 8100rpm÷3(internal gearing of the engine)*25÷25(gear teeth ratio of the highest gear)*0,06*0.254m(tire outer diameter)*15(teeth)÷16(teeth)*15(teeth)÷20(teeth) = 90.89km/h or divided by roughly 1,6 equals to 56.8mph theoretical speed 8100÷3*25÷25*15÷16*15÷20 Without these brackets this value will always be a little higher than the speed you actually drive if the numbers are right since this doesnt account for friction. In that afforementioned formula, you can interchange any of these numbers with what you actually have in your setup, the brackets are only there for clarity and dont show up in the actual math. If you got the year and model of the engine you should be able to find the actual internal gear ratio of the engine and the gears. The internal gear ratio should be a static number like 2.94 and the gear ratios of the gears should be something like 14÷36 for the first and 25/25 for the last gear. If you want to have the highest increase on speed by changing out sprockets you should swap large sprockets out with small ones on the driven side of any axle while keeping the rest at the same ratios.
Slowed Music
Slowed Music 11 ամիս առաջ
i want to see yall take it to a drag strip
Mike O'Barr
Mike O'Barr 11 ամիս առաջ
It needs a low lip splitter/wing to produce some downforce to keep it stable and help with steering at speed
corbin larson
corbin larson 11 ամիս առաջ
Thing needs a big ram air intake like you made for the drag kart
RocketPink
RocketPink 11 ամիս առաջ
No No your doing it all wrong hear me out your a header and that roof is a hood what do you do when the header doesn't fit in the hood? i expect answers that are wrong
PhantomPanic
PhantomPanic 11 ամիս առաջ
Good god can you guys please buy a gimbal?
Kerry Stimpson
Kerry Stimpson 11 ամիս առաջ
I love all your projects, especially the ones where you use bigger motors. I am addicted to "POWER". Thank You for a great channel.
Captain Cripple
Captain Cripple 11 ամիս առաջ
It’s like grind hard plumbing but no where near as cool lol
Frisch’s Garage
Frisch’s Garage 11 ամիս առաջ
2 big bearings on the axle with bars running from both sides of the frame to the bearing sleeves on the axle, migh save on buying a new axle
Frisch’s Garage
Frisch’s Garage 11 ամիս առաջ
Could see you guys putting 100 yard cement strip with a speed reader at the end for your own mini drag strip for these builds for super accurate timing and a hole lotta fun
the PROfascinater
the PROfascinater 11 ամիս առաջ
You guys do go karts , but what about other dangerous old toys. maybe do a pogo stick mini build ?
Every day life with me
Every day life with me 11 ամիս առաջ
Chain guard wow that sounds good and safety parts
smkyツ
smkyツ 11 ամիս առաջ
Hey guys, i'm looking to build a go kart with my dad but i'm having trouble finding a frame that would fit the Tillotson 212cc engine, any suggestions?
Logan Maxwell
Logan Maxwell 11 ամիս առաջ
Make a wish go kart.
Clayton Titus
Clayton Titus 11 ամիս առաջ
Cut a hole throw the roof of the tot rod so your head will fit
Drunken Hamster
Drunken Hamster 11 ամիս առաջ
Gear it for 100mph. It's got the power to get there in a bike with not too much slowdown towards the top end. Plus, gear spacing will be far more reasonable. AND you could claim "100mph burnout" as Cleetus Mcfarland did for his 6th gear turbo Corvette "200mph burnout".
Macdaddy
Macdaddy 11 ամիս առաջ
Looks like a toy Tbucket!! Tbucket roadster doesn't have a top does it!Bad to the bone guys! Like to see it on pavement! 1/8 or 1/4 mile.
Wylie Wiggins
Wylie Wiggins 11 ամիս առաջ
www.gearingcommander.com/
99 miles away
99 miles away 11 ամիս առաջ
Guys, there is nothing to say but how much I love that thing. It looks like a mini hotrod, it sounds like a mini hotrod, and it gets JIIGGGYYYYYYY!
Tré_ LMK
Tré_ LMK 11 ամիս առաջ
Take the top yellow part off from the four legs/post things then attach it to the back to put more height to the back rest
Grant Hasse
Grant Hasse 11 ամիս առաջ
Race it against the jragster
David Floer
David Floer 11 ամիս առաջ
You probably have 75+ on pavement. Grind hard has Senderella and it does 85.
Daniel Littlejohn
Daniel Littlejohn 11 ամիս առաջ
You should put the Ducati Motor on the cross cart...
Nick Parma
Nick Parma 11 ամիս առաջ
why cant they go on the road anymore?
papa franku
papa franku 11 ամիս առաջ
Just build a roll cage on it and paint it yellow
Regilio Bouma
Regilio Bouma 11 ամիս առաջ
ROAD TEST..... PLEASE
Pablos Gaming937
Pablos Gaming937 11 ամիս առաջ
100 likes say they do a pocket bike build!!!!!!!!!!!
Sergio Vasquez
Sergio Vasquez 11 ամիս առաջ
Cosycoup with off road tires
Kris Johnston
Kris Johnston 11 ամիս առաջ
Great video guys, I'm glad neither one of you died in the process! Hahaha! That does not look like the place for a top speed run, especially in that thing! I like the suggestion in another comment, you should call it the "Little Yikes! " Thanks for sharing, guys!
TJ LABBEE
TJ LABBEE 11 ամիս առաջ
Last time I saw a chain steering wheel was in 2002 in my buddies 67 Monza spider he dropped a 350ci into. Complained about his pinky finger getting stuck in it... Lol
Chad
Chad 11 ամիս առաջ
First cut is the deepest... that steering wheel was a heartbreaker.
Michael Gillliam
Michael Gillliam 11 ամիս առաջ
Ya'll could do a roll bar, paint it yellow, and get a yellow harness.
Jacob Adkins
Jacob Adkins 11 ամիս առաջ
I really wish yall would just change the body to a wheel barrel it would look just as good yall would be more comfortable in it and I belive it would make it more enjoyable for everyone yall and us the little tykes car is cool but it dint seem as cool as it could be
Andrew OBrien
Andrew OBrien 11 ամիս առաջ
Is there an A/T tire that would fit that rear wheel setup? Might grip a little better out in the grass and gravel.
Wade Whitman
Wade Whitman 11 ամիս առաջ
Someone has a nice start to a junk yard going there!!
Da sickest
Da sickest 11 ամիս առաջ
put it on the road
Mauricio Gianotti
Mauricio Gianotti 11 ամիս առաջ
Good rip amen
Jasonlt1982
Jasonlt1982 11 ամիս առաջ
Needs an 8 ball shifter
Dayshawn Tynes
Dayshawn Tynes 11 ամիս առաջ
Try paddle tire
Ella hess
Ella hess 11 ամիս առաջ
why dont you just get yourself a yellow lether jacket it would make it resemble the top of the car
ghetto Santa
ghetto Santa 11 ամիս առաջ
You guys should get a cozy coupe trailer and pull a cooler with it at events lol
Crunchy Boii
Crunchy Boii 11 ամիս առաջ
I’m thinking for your next go kart it should be front engine, front wheel drive, and fully rear wheel steering. So basically just driving in reverse, except far more terrifying.
Andrew Dougherty
Andrew Dougherty 11 ամիս առաջ
Just wear a Yellow helmet.
Mish Will Race
Mish Will Race 11 ամիս առաջ
It looks really comfortable to drive!
Jason Shreeve
Jason Shreeve 11 ամիս առաջ
Isaac your an animal lol
Logan B
Logan B 11 ամիս առաջ
You guys make the coolest shit I’ve ever seen! But there gonna hurt them selfs badly one day😔
Jeff Vanbrielle
Jeff Vanbrielle 11 ամիս առաջ
So, you were onto something there when he was holding it on his back, converting from a roof to a high seat back would give a nice look and not out the roof to waste.
Joaquin Juarez
Joaquin Juarez 11 ամիս առաջ
I thumbed up when I heard "chain steering wheel"
Mack Attack
Mack Attack 11 ամիս առաջ
How do I get these kinds of gocarts🤣
troy barnhouse
troy barnhouse 11 ամիս առաջ
You need a footprint gas pedal to go with the chain steering wheel.
K S
K S 11 ամիս առաջ
Correct me if I’m wrong, but.... aren’t those giant 200 foot tall power poles that are as wide as your ‘cozy cart’, that you are passing at 50+mph ....... MADE OF STEEL.
Digger Doug
Digger Doug 11 ամիս առաջ
Man.... I'm sorry, but I'd have to make another chain wheel rather than cut a real classic up!
Making it Happen
Making it Happen 11 ամիս առաջ
I think it would be a good idea to extend it forward in front of the engine. Then it gets better road performance.
Owen Roth
Owen Roth 11 ամիս առաջ
Y'all need to save up some ad revenue and pave that lane.
Rogue Patriot
Rogue Patriot 11 ամիս առաջ
I think a set of pro taper bars would stabilize the steering
sinformant
sinformant 11 ամիս առաջ
I still say it needs some brown paint smears here and there for a patina rat rod look. Maybe a pair of round pod headlights up front
slashmaster2
slashmaster2 11 ամիս առաջ
So what is this nice arrow straight road they run on? An abandoned railroad?
Jon Lasaga
Jon Lasaga 11 ամիս առաջ
www.csgnetwork.com/speedcalc.html if you go here and put in your tire size transmission gear ratio and then your final gear ratio you can get the top speed easily. All you have to do is count the teeth and determine how many rotations it is to each rotation of the rear wheel.
Drake Orion
Drake Orion 11 ամիս առաջ
Totally needs a tarmac top speed in "Mexico "
550cc Little Tikes Go Kart hits the Dyno!
14:21
CarsandCameras
Դիտումներ 184հզր
John Krasinski Is Hosting Saturday Night Live!
0:15
Saturday Night Live
Դիտումներ 117հզր
Here's How Queen Elizabeth Responded To Biden's Inauguration
3:44
HermitCraft 7: 73 | So... I did some MINING off camera!
22:31
What’s Driving California’s Mass Exodus?
19:09
CNBC
Դիտումներ 2.5մլն
Reviving the Rat Rod Wagon! | Our Rat Rod Go Kart Build
15:04
CarsandCameras
Դիտումներ 993հզր
750cc Cross Karts Gets Mufflers & Destroys Tires!
17:29
CarsandCameras
Դիտումներ 478հզր
900cc Ducati Kart Paddle Shifter Install | "Death Ducarti"
15:57
CarsandCameras
Դիտումներ 4.8մլն
88 MPH DeLorean Kart Build Pt.1 | Vintage Go Kart Chassis
12:04
CarsandCameras
Դիտումներ 1.5մլն
Building the Ultimate "Toy Hauler" Pt. 1!
11:38
CarsandCameras
Դիտումներ 127հզր
Build a 250cc Go Kart at Home - Tutorial
28:23
Creative Channel
Դիտումներ 10մլն
50HP kx250 2 Stroke Shifter Kart Returns! IT RIPS
12:23
Vasily Builds
Դիտումներ 816հզր
Game Changing Race Engine! The Tillotson 225
13:10
CarsandCameras
Դիտումներ 195հզր
Will the 550cc Little Tikes Car Wheelie?
14:13
CarsandCameras
Դիտումներ 436հզր
John Krasinski Is Hosting Saturday Night Live!
0:15
Saturday Night Live
Դիտումներ 117հզր
Here's How Queen Elizabeth Responded To Biden's Inauguration
3:44
HermitCraft 7: 73 | So... I did some MINING off camera!
22:31
What’s Driving California’s Mass Exodus?
19:09
CNBC
Դիտումներ 2.5մլն
TELLING MY BOYFRIEND HE HAS A "WAP" TO SEE HOW HE REACTS..
15:52
Lex and Jack
Դիտումներ 91հզր
We Turn The Corvair Build Upside Down!
14:39
Matt's Off Road Recovery
Դիտումներ 367հզր
Today Sucked.
17:03
Keep Your Daydream
Դիտումներ 115հզր